Storage; Disposal And Protection Of The Environment; Replacement Parts; Technical Data - Grizzly Tools ERT 450-20 Traduction De La Notice D'utilisation Originale

5. Return the hood. Ensure that the locks
of the hood are accurately inserted in
the corresponding recesses of the cut-
ting head. They lock in audibly.
6. Press the retaining head (20), release
it again and pull the ends of the cord
out a little. Repeat this process until
the ends of the cord project a little be-
yond the cord cutter)
Check the string cutter. Do not use
the appliance without a string or
with a defective string. Contact our
nearest Service Centre in case the
string cutter is damaged.

Storage

• Carefully clean the trimmer and its ac-
cessories after each use (see "Clean-
ing and maintenance"), thereby avoid-
ing mould formation.
• Store the trimmer in a dry place well
out of reach of children.
• Do not expose the trimmer for extend-
ed periods to direct sunlight.
• Do not wrap plastic sacks around the
trimmer as this could result in the for-
mation of moisture and mould.
• Do not stand the trimmer on its pro-
tective cover. Suspend it by its upper
handle in such a manner that the pro-
tective cover does not come into con-
tact with other objects. This is because
the protective cover could become
deformed, thereby changing its dimen-
sions and its safety properties.
Disposal and protection
of the environment
Dispose of the trimmer, its accessories
and the packaging in an environment-
friendly manner.
Electrical appliances must not
be disposed of with the domestic
waste
Hand in a redundant trimmer to a recy-
cling centre. The plastic and metals can
then be sorted out and graded for recy-
cling. Our Service Centre will be happy to
answer any questions in this respect.
Defective units returned to us will be dis-
posed of for free.

Replacement parts

Spare parts and accessories can be
obtained at
www.grizzlytools-service.eu
If you have any other questions, contact
the "Service-Center" (see "Service-Cent-
er").

Technical data

Electric lawn trimmer ......... ERT 450-20
Rated input voltage..... 220-240 V~, 50 Hz
Power input..................................... 450 W
Idling speed ............................10000 min
Weight without cable ..........aprox. 2.16 kg
Dual line.................... 6 m, fully automatic
Cutting circle dual line ................. 300 mm
Line thickness dual line ................ 1.6 mm
Protection Class .................................
Sound power level (L
guaranteed .............................. 96 dB(A)
measured .... 93.05 dB(A); K
Sound pressure level
(L ) ..............70.05 dB(A); K
pA
Vibration (a ) ......... 5.035 m/s
h
Noise and vibration ratings have been
determined pursuant to the standards and
regulations specified in the declaration of
conformity.
GB
)
WA
= 1.03 dB
WA
= 1.03 dB
pA
; K=1.5 m/s
2
-1
II
2
65