Helios BWM Notice De Montage Et D'utilisation page 8

Installation and Operating Instructions
EN
CHAPTER 3
INSTALLATION
Motion Detector – BWM
3.0 Installation
Suitable for wall installation or installation on a flush-mounted box (Ø 55 mm).
– Wall installation (surface-mounted)
Base (4 hole) for vertical or horizontal installation with predetermined breaking point for
cable entry at top or bottom.
– Installation on flush-mounted box
Base (4 hole) for attachment to vertically or horizontally installed flush-mounted box
with cable entry at the back.
3.1 Open casing
Push snap-in hooks inwards (see Fig. 3).
The unit electronics are located in the casing cover.
3
Fig.2
Fig.3