Publicité
Les langues disponibles
Les langues disponibles
Installation and Operating Instructions
EN
CHAPTER 1
GENERAL
INFORMATION
m
Motion Detector – BWM
1.0 Important information
In order to ensure complete and effective operation and for your own safety, all of the
following instructions should be read carefully and observed. The relevant national stan-
dards, safety regulations and instructions (e.g. DIN EN VDE 0100) as well as the technical
connection conditions of the energy supply company must be observed and applied.
Please keep the installation and operating instructions for reference. The document must
be issued to the operator (tenant/owner) after the final assembly.
1.1 Warning and safety instructions
The adjacent symbol is a safety-relevant warning symbol. All safety regulations
and/or symbols must be absolutely adhered to, so that any dangerous situation
is avoided.
1.2 Warranty claims – Exclusion of liability
Our warranty shall not apply if the following instructions are not observed. The same
applies for liability claims against the manufacturer. The use of accessories, which are
not recommended or offered by Helios, is not permitted. Any damage that may occur is
not liable for warranty.
1.3 Regulations - Guidelines
If the product is installed correctly and used to its intended purpose, it conforms to all
applicable regulations and EC guidelines at its date of manufacture.
1.4 Receipt
Please check delivery immediately on receipt for accuracy and damage. If damaged,
please notify the carrier immediately. In case of delayed notification, any possible claim
may be void.
1.5 Storage
When storing for a prolonged time, the following steps are to be taken to avoid damaging
influences: Protection by dry, air-dustproof packing (plastic bags with drying agent and
moisture indicators). The storage place must be waterproof, vibration-free and free of
excessive temperature variations. Damages due to improper transportation, storage or
commissioning must be verified and are not liable for warranty.
1.6 Personnel qualification
The electrical connection and commissioning as well as the installation work must only
be carried out by qualified electricians.
1.7 Area of application
The motion detector BWM detects movements and the presence of persons via a sen-
sor. The motion sensor is used for the demand-based regulation of lighting in building
automation, in corridors, in workplaces, in industrial buildings, in offices and in business
premises.
The motion detector must not be used for monitoring purposes which serve to protect
persons against hazards or injury and it must not be used as an emergency stop
switch for systems and machines or comparable safety-related tasks.
Any use other than the intended use is prohibited!
1
Publicité
