Chauvet DJ 4BAR Flex T USB Guide De Référence Rapide page 5

Menu Map
MODE
DMX Mode
Static Colors
Automatic
Programs
Auto Speed
Sound-Active Mode
Sound Sensitivity
Custom Color
Mixing
Infrared Mode
Wireless
Footswitch
DMX Linking
The 4BAR Flex T USB can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 510.
Master/Slave Connection
The 4BAR Flex T USB uses the DMX data connection for its Master/Slave mode. Information about configuring the 4BAR
Flex T USB for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
IRC-6 (Infrared Remote Control)
The 4BAR Flex T USB can be operated with the CHAUVET DJ IRC-6. For more information about the IRC-6, download
instructions for the IRC-6 or the 4BAR Flex T USB User Manual from www.chauvetdj.com.
Wireless FootSwitch Operation
2
1
6. Use the chart below to activate the desired function.
4BAR Flex T USB QRG Rev. 2
QUICK REFERENCE GUIDE
PROGRAMMING LEVELS
3Ch d001–510
15Ch d001–498
C-- C 1–7
Auto
S-- S 1–100
Snd
Sens u 1–100
r000–255
U-- g000–255
b000–255
SEt
On
rF
3
DESCRIPTION
3-channel DMX mode
15-channel DMX mode
Static colors
Automatic programs
Program speed for P 1–7
Sound-active programs
Sound sensitivity
Custom static colors
Combine red, green and blue
on
Turns infrared on or off
oFF
rF 1 – rF16 Turn on/off wireless footswitch connectivity and
selects receiving channel (receiving channel
must match transmitting channel on the
Off
footswitch)
The included wireless footswitch provides quick access to preset
colors, color-change programs, and sound-activation through the
4BAR Tri USB microphone.
To use the footswitch:
1.Connect the 4BAR Flex T USB to power. Turn the wireless
footswitch on.
2.Press <MENU> on the 4BAR Flex T USB and navigate to rF
mode and press <ENTER>. Choose a channel and press
<ENTER>.
3.Press <MENU> on the 4BAR Flex T USB and navigate to
Auto mode and press <ENTER>.
4.Set the DIP switch channel on the wireless footswitch to match
the channel set on the 4BAR Flex T USB. (Use the
Channels image for help)
5.Press pedal #1 (Colors) to activate Static Color controls. When
working, all the lights will begin in a Static color and FOOr will
appear on the Menu display.
EN
DIP Switch
4