Herth+Buss ELPARTS 95924003 Notice D'emploi page 5

Operating Instruction
WASHER (12 pcs each size)
EN
Tap material
SKS 3
Tap hardness
HRC 55-58
Plug material S15C
www.herthundbuss.com
95924003
Plug surface
Zinc Plating
Plug hardness
HRC 55-58
Washer material Aluminium
8
Operating Instruction
3. Instructions
Always read the instructions
carefully before using the tool
DO NOT use an air/impact
wrench to work with the tool
Ensure the working area has
adequate lighting
Keep children and unauthorized persons
away from the working area
Keep working area clean and tidy,
dry and free from unrelated materials
a. Remove the drain plug.
b. Choose a suitable sized tap to enlarge and
create new threads on the oil drain plug
hole (Fig. 1).
c. Clean the drain plug hole.
d. Insert a new washer on the new drain
plug provided, and connect the drain plug
to the re-threaded drain plug hole.
9
95924003
DO NOT allow untrained persons to
use this tool kit
Always wear eye protection that meets
OSHA and ANSI Z87.1 standards
Always wear gloves when working with
the tool
Always wear ear protection
Disposal: Customers should follow local
regulations to handle used/wasted parts
EN