Publicité
Les langues disponibles
Les langues disponibles
6.1 Heat setting
•
The device is controlled by digital temperature control technology, the maximum temperature is 120℃.
•
Set the target temperature with the Tº button (4) and adjust it with the knob (2) to the target value. For saving this
parameter press the knob (2).You shall see the working temperature on the screen (7). The device will start with
the heating function
6.2 Timer setting
The device can work in accordance with the timing mode or continuous operation mode.
By default, this option will remain inactive, the device will work continuously until it's turned off manually. In
order
specific periods of time, proceed as follows:
•
To set the timing mode, press the timer button (3), (the time display area will be flashing)(8) and will
show the last setting, by default will be "00:00".
•
Rotate the parameter setting knob (2) to set the target time (min), press the parameter setting knob to
save the selected option. On the timing screen (8), the countdown will be displayed.
During operation, motion can be stopped at any time by pressing the speed/timer control knob. If
the knob is pressed again, motion and timer countdown will restart. When the timer reaches zero, the
unit will stop automatically.
•
To set the continuous mode: Press the time switch button (3), the characters in time display area will be
flashing, make sure the setting time is "00:00", press the parameter setting knob (2) to save the changes
and the timer will be disabled.
Note: The working temperature needs to be set before the timer.
Note:
•
Make sure that the voltage required by the equipment
matches with electrical network.
•
Make sure the main power cord is not in contact with the
heating surface
•
If the equipment is damaged, please disconnect it from
the electrical network.
to
7
work
with
Publicité
