Quax INDIGO 540454 3D Serie Manuel page 39

INDIGO
540454xx-3D
Step 11 : Use the parts of step 3, 4, 6, 8 and 9 as well as six wood screws J
Push the end sides and the intermediate side (EB2 RH, EB2 LH, EB4 and EB6) with their wooden dowels
into the holes and over the connectors of the bottom. Tighten the eccentrics. Push the wood screws (J)
through the drillings in the bottom and tighten them in the middle sides. Push the top (EB1) with its con-
nectors into the holes and over the wooden dowels of the sides. Tighten the eccentrics.
Step 12 : Use the parts of step 11, the backs EB10, EB11 and EB12, thirty-four wood screws K and sixteen
connecting plates L
Place the structure with its front on a blanket. Place the backs (EB10, EB11 and EB12) in the right order
parallel to the back of the structure. Check if distance A = B. Now place the connecting plates (L) and fi x
the backs on the structure with the wood screws (K).
Kleerkast met drie draaideuren
Schrankwand mit drei Türen
Armoire avec 3 portes battantes
Wardrobe with three doors
Quax
First dreams
®
First steps
39