Quax INDIGO 540454 3D Serie Manuel page 37

INDIGO
540454xx-3D
Step 6 : Use the parts of step 5, the intermediate side EB4, eight wooden dowels F, eight eccentrics H,
twelve shelves supports K and two clothes rail holders R
Insert two wooden dowels (F) in the drillings beneath and above the intermediate side (EB4). Push four
wooden dowels (F) in the holes on the front of the side. Push three eccentrics (H) in the drillings at the top
of the side. Push fi ve eccentrics (H) in the holes on the front of the side. Push six shelf supports (K) in the
drillings on both sides of the side and make sure they are at the same height. Push the clothes rail holders
(R) in the holes on the top of the side.
Step 7 : Use the intermediate profi le EB7 and fi ve connectors G
Tighten the connectors (G) in the drillings at the bottom of the profi le (EB7).
Step 8 : Use the parts of step 7, the intermediate side EB6, eight wooden dowels F, eight eccentrics H,
twelve shelves supports K and two clothes rail holders R and three hinge mounting plates N
Insert two wooden dowels (F) in the drillings beneath and above the intermediate side (EB6). Push four
wooden dowels (F) in the holes on the front of the side. Push three eccentrics (H) in the drillings at the top
of the side. Push fi ve eccentrics (H) in the holes on the front of the side. Push six shelf supports (K) in the
drillings on both sides of the side and make sure they are at the same height. Push the clothes rail holders
(R) in the holes on the top of the side. Attach the hinge mounting plates (N) with the provided screws in the
drillings at the bottom, in the center and at the front of the sides.
Kleerkast met drie draaideuren
Schrankwand mit drei Türen
Armoire avec 3 portes battantes
Wardrobe with three doors
Quax Quax
First dreams First dreams
® ®
First steps First steps
37