Quax INDIGO 540454 3D Serie Manuel page 38

INDIGO
Quax
First dreams
®
First steps
Step 9 : Use both sides EB2 LH and EB2 RH, four wooden dowels F, six connectors G, four nuts E, six eccentrics
H, six hinge mounting plates N, twelve shelves supports K and two clothes rail holders R
Push two wooden dowels (F) in the drillings on top of the sides (EB2 LH and RH). Push three eccentrics (H) in
the holes on top of the sides. Push two nuts (E) in the drillings at the bottom of the sides. Tighten three connec-
tors (G) in the holes at the bottom of the sides. Attach the hinge mounting plates (N) with the provided screws in
the drillings at the bottom, in the center and at the front of the sides. Push six shelf supports (K) in the drillings on
both sides of the side and make sure they are at the same height. Push the clothes rail holders (R) in the holes
on the top of the side.
Step 10 : Use the three doors EB13, nine hinges O and eighteen wood screws P
Push the hinges (O) into the drillings of the doors (EB13) and tighten with two wood screws (P).
38
Kleerkast met drie draaideuren
540454xx-3D
Schrankwand mit drei Türen
Armoire avec 3 portes battantes
Wardrobe with three doors