Publicité
Les langues disponibles
Les langues disponibles
840156702 ENv04.qxd:Layout 1
Parts and Features
Control Knob
HEPA-Grade
Filter
Air Outlet
Grille
Removable
Base
(can be
removed
when used
in console
mode)
How to Install and Replace
the Carbon Filters and
Filter Holder
4
11/13/09
2:37 PM
Page 4
Ionizer/Light On/Off Button
(on select models)
Replaceable
Carbon Filters
Filter Holder
Opening Tab
Air Intake
Permanent Prefilter
(located on inside
front panel)
Control Knob – Turn the control knob to the desired setting.
There are five settings:
• Off
• WhisperClean
constant low-speed filtration.
• Medium – Provides a higher fan speed; use to quickly filter
dust, pollen, etc., from a room.
• QuickClean
TM
• Ionizer – On select models, the ionizer will activate for fresher,
cleaner air. Also illuminated with a soft blue ambient light
(on select models).
Adhesive Feet
Timestrip
Four adhesive feet are provided to use
Holder
the air purifier in console mode as shown
on the front cover. Adhere the feet to
indentations as shown in the illustration.
Front
Panel
How to Replace the Timestrip Cartridge:
1. Press firmly on foil bubble on the cartridge
to activate. A red line will appear a few
moments later on the left side of the holder
to indicate it has been correctly activated.
2. Slide activated cartridge into the plastic
holder on unit.
3. The activated cartridge will "count down"
for 3 months, indicating that it is time to
replace the filter.
TM
– Use for quiet, nighttime operation or for
– Provides cleaning during acute needs.
Publicité
