Maintenance,Care, Troubleshooting - Travel Buggy DASH Mode D'emploi

MAINTENANCE, CARE, TROU BLESH OOTIN G
It is important to perform regular
maintenance of your DASH Ultra Lite for
longevity and warranty eligibility. Even a
little cleaning now and again will go a long
way to keeping your device looking and
functioning like new.
Certified repair shops with trained
professionals who specialize in Power Chairs
and scooters will be qualified to perform
the service and maintenance on your DASH
Ultra Lite Power Chair should it be required.
Please be sure to keep a log of the service
and maintenance performed. Your shop or
technician may require parts, which Travel
Buggy has available.
We recommend you inspect your DASH
Ultra Lite two to three times per year for in
the following areas:
• Frame: tighten loose screws as
necessary using the tool kit included
with your DASH Ultra Lite.
• Wheels: make sure they rotate easily.
Significant resistance may require new
bearings.
• Armrests: look for excessive wear or if
they are loose.
Question
Why is there
NO POWER
to the DASH
Ultra Lite?
Why does my
power chair
beep and not
move?
22
Possible Causes
• Battery is not inserted
correctly
• Controller system CPU
and joystick are not
connected
• Battery power is too
low.
• Freewheel mode
engaged
• Other error code
Replacement parts and more major
maintenance issues should be done by a
professional. We do not recommend that
you do intense types of maintenance work
to the DASH Ultra Lite yourself.
LUBRICATION
• If a persistent squeaking noise begins to
occur follow these steps:
1. Locate the area of the squeak, usually
the front wheel (bearing) or front fork
areas.
2. Remove the parts and clean any debris
from the area
3. Lubricate the fitting components with
a wheelchair or bike lubricant prior to
putting it back together
4. Do no over-tighten the bolts when you
put it back together If the squeaking
continues or gets worse contact a Travel
Buggy service representative
• Your DASH Ultra Lite power wheelchair
has electric hub motors that do not
require lubrication, please do not
lubricate the motors.
Answer
• Remove and re-insert the battery, make
sure it is fully inserted into its mounting port
below the chair.
• Ensure all connections between Joystick,
CPU and Battery are securely tightened
• Charge the Battery
• Ensure the rear motor switches are in
POWER mode, rear wheels should be locked
• Contact Travel Buggy if other error code
present