Travel Buggy DASH Mode D'emploi page 13

SETUP
1
• Before sitting in the Power Chair, be sure the power button
is OFF and the rear brake levers are in the DOWN (locked)
position
• DASH Ultra Lite offers the user 2 optional entry alternatives,
direct front entry or side entry
• If you prefer a front entry, we recommend flipping up the
foot plate to create an easier sitting experience
• DO NOT step on the footplate when entering or exiting the
DASH Ultra Lite as it may cause the power chair to move in
an unsafe manner
2
• Joystick can be positioned on left or right arm rest
• To change joystick position, first remove the joystick by
performing the opposite sequence of the steps above
• Move the power cable to the opposite side and re-fasten
with plastic ties, be sure the cable is not interfering with
the folding or movement of the power chair
• Connect the joystick
To enter from the side of
the chair, press down on
the arm rest release button
as shown in image 1. Raise
the arm rest back and
away. When seated, lower
arm rest back into position
and ensure it is locked.
13