3. Place the filter into the filter holder, making sure it is assembled correctly.
4. Place a paper filter (not supplied) of 4-12 cup size into the nylon filter.
5. Add the desired ground coffee in the paper filter.
It is recommended to use a level spoon of ground coffee (approximately 6g) for
every cup of coffee.
6. Close the cover.
7. Slide the carafe into the appliance ensuring it sits correctly on the warming plate.
8. Press
to switch on the coffee maker.
The power indicator light (
brewing coffee.
9. The coffee will begin to flow from the filter holder after a short time.
During brewing, you can remove the carafe from the warming plate. The
brewing process does not stop during this period and only the flow of coffee
from the filter holder stops. Do not remove the carafe for longer than 15
seconds or the coffee may overflow the filter holder.
Although the coffee maker has the above feature, it is not recommended to
pour coffee before the cycle has completed as do this may affect the flavour of
the coffee.
It is normal for the appliance to emit steam while it is brewing coffee.
10. When the brewing process is finished, you will hear a few beeps.
11. To keep coffee warm after the brewing process has finished, place the carafe on
the warming plate.
The appliance is designed to keep the coffee warm for approximately 40
minutes and then the appliance will be turned off automatically.
12. To turn off the appliance press Stop. The power indicator light (
Programming the Automatic Start
The appliance can be programmed to make drip coffee automatically.
First, make sure the time is set correctly.
To set the clock in 24-hour cycle
Repeatedly press Hr and Min respectively to set the correct time.
To speed up time setting, press and hold Hr/Min to scroll through numbers quickly.
To set the delayed start time
1. Press
.
The timer indicator light (
2. While the timer indicator light is flashing, repeatedly press Hr and Min respectively
to set the time you want to start brewing coffee.
To speed up time setting, press and hold Hr/Min to scroll through numbers
quickly.
3. After the desired time is set, press
The timer indicator light (
current time.
) will illuminate, indicating that the appliance is
) will flash.
.
) will stop flashing and the display will show the
) will go out.
6