TEFAL STORE'INN DO301EA2CH Mode D'emploi page 35

through the filling hole, and do not fill above the maximum filling line on the jug.
Maximum operating time: 3 min.
Tips:
• When blending, if some ingredients stick to the sides of the jug, stop the appliance and unplug it. Remove the
blender jug assembly from the appliance. Using the spatula, push the preparation onto the blade. Do not use
your hands or fingers inside the bowl or close to the blade.
(j)
• The blender stick allows you to homogenise and process your preparations (especially thicker ones) inside
the blender jug. Insert the stick through the centre hole of the blender jug lid
food towards the blades using the stick.
(j)
• Do not use the stick
You can:
• prepare finely blended broths, veloutés, soups, stewed fruit, milk-shakes, smoothies, cocktails.
• mix all kinds of batters (pancakes, doughnuts, clafoutis).
ACCESSORIES USED:
(l)
• Fruit juicer assembly
(b3)
• Bowl .
FITTING THE ACCESSORIES:
(b3)
• Fit the bowl onto the motor unit
(i2)
• Slide the drive pin
(i3)
• Place the basket onto the bowl and lock it in place.
(i1)
• Fit the cone onto the basket funnel
• To remove the fruit juicer assembly: release the basket
assembly from the motor unit.
STARTING AND TIPS:
• Cut the fruit in half and hold in place on the cone (i1).
• Turn the speed selector (a3) to position 1 to start.
You can get up to 1.2l of fruit juice without emptying the bowl.
• Caution: you must rinse the basket every 0.2l.
8 : Storage of the accessories
• Your food processor has a built-in storage drawer
4 vegetable cutter inserts
• After putting the accessories inside, slide the storage drawer
ACCESSORIES USED:
• Chopping assembly.
With the chopping, you can :
• Finely chop in seconds: dry apricots, dry figs, cored prunes:
quantity/maximum time: 50g/6 seconds.
Cleaning
• Unplug the appliance.
• To make cleaning easier, rinse the accessories each time after use.
without the lid otherwise it will touch the blades.
7 : Juice fruits (depending on model)
.
(a)
and lock it in place.
onto the motor unit drive
(i3)
.
(f)
.
9 : Finely chopping small quantities
(a1)
.
(i3)
then the bowl and you can then remove the
(l)
where you can place the multi-purpose blade
(l)
inside the motor unit
(depending on model)
33
(h2)
. When operating, push the
(d)
, and the
(a)
.
GB