TEFAL STORE'INN DO301EA2CH Mode D'emploi page 34

GB
STARTING AND TIPS:
• Insert the food into the lid funnel and guide it with the food pusher
• Turn the speed selector
You can prepare with the inserts (depending on model):
. coarse grating
. thick slicing
(E)
. chip cutter
. reibekuchen / Parmesan disk
5 : Emulsifying/beating/whisking
ACCESSORIES USED:
• Bowl assembly
(c)
• Drive pin .
• Emulsifying disk
FITTING THE ACCESSORIES:
(b3)
• Fit the bowl
• Slide and lock the emulsifying disk
fit the assembly onto the motor unit drive
• Place the ingredients in the bowl.
(b2)
• Fit the lid
• To remove the bowl-lid assembly: release the lid then release the bowl.
STARTING AND TIPS:
• Turn the speed selector
• Do not use this accessory to knead heavy pastry or mix light pastry.
You can prepare: mayonnaise, aioli, sauces, egg whites (1 to 6), whipped cream, Chantilly cream (up to 0.2
litres).
ACCESSORIES USED:
• Assembled blender jug
(j)
• Blender stick
FITTING THE ACCESSORIES:
• Place the ingredients inside the blender jug
(h2)
• Fit the lid
• Place the jug assembly
• Wait until the food processor has stopped completely before removing the blender jug from the motor unit.
STARTING AND TIPS:
• Turn the speed selector
You can use the pulse position, for better control of the mixture.
• Do not fill the blender jug with boiling liquid.
• Do not use the blender jug to grind dry foods (walnuts, almonds, peanuts...).
• Always use your mixer bowl with its lid.
• Always pour liquid ingredients first into the jug before adding the solid ingredients, below the maximum
capacity:
- 1 l for thick mixtures.
- 0.8 l for liquid mixtures.
• To add ingredients when blending, remove the measuring cap
(a3)
to position 1 to slice or position 2 to grate.
(C) (A)
/fine grating : celeriac, potatoes, carrots, cheese...
(H) (D)
/fine slicing : potatoes, onions, cucumbers, beetroot, apples, carrots, cabbage...
: French fries...
(G)
: parmesan, coconut...
(b)
.
(e)
.
(a)
onto the motor unit
(e)
and lock it onto the bowl
(a3)
to position 2 to start.
6 : Homogenising/mixing/fine blending
(h)
.
(depending on model)
, equipped with the measuring cap
(h)
onto the motor unit drive
(a3)
to position 1 or 2 to start.
and lock it in place.
the right way up onto the drive pin
(a1)
.
(b3)
.
(h3)
below the maximum level line on the jug.
(h1)
, and lock it in place on the jug.
(a2)
, with the blender jug handle facing you.
32
(b1)
.
Fit the emulsifying
disk the right
(c)
, and
way up:
see illustration 5.
(depending on model)
(h1)
from the lid and pour the ingredients