TEFAL STORE'INN DO301EA2CH Mode D'emploi page 32

GB
Description
a
Motor unit
a1 : Motor unit slow speed
a2 : Motor unit fast speed
a3 : Speed selector: Pulse position
(intermittent operation) -0-1-2
ACCESSORIES DEPENDING ON MODEL:
d
Multi-purpose blade
e
Emulsifying disk
f
Vegetable cutter inserts
A : Fine grater
D : Fine slicer
C : Coarse grater
G : Reibekuchen / Parmesan
H : Thick slicer
E : Chip cutter
g
Insert supports for vegetable cutter inserts
h
Blender jug
h1 : Measuring cap
h2 : Lid
h3 : Bowl
First use
• Before using for the first time, wash all parts of the accessories in hot soapy water (see cleaning paragraph).
Rinse and dry.
• Place the motor unit
• Plug in your appliance.
• Pulse (intermittent operation): turn the knob
of certain preparations.
• Continuous operation: turn the knob
• Stop: turn the knob
The paragraphs are numbered to match the numbering of the illustrations.
1 : Fitting the chopping bowl and the lid
ACCESSORIES USED:
• Bowl assembly
FITTING THE ACCESSORIES:
(b3)
• Fit the bowl
hand side.
(b3)
• Lock the bowl
• Fit the lid (b2) onto the bowl
The bowl must be locked onto the motor unit (a) before locking the lid
• Release the lid by turning it in a clockwise direction to free it from the bowl handle. You can then lift and
remove it.
• Release the bowl by turning it in a clockwise direction.
(a)
on a flat, clean and dry surface.
(a3)
(a3)
to position 0.
(b)
.
onto the motor unit
by turning it towards the right.
(b3)
. Lock the lid in place by pushing it towards the right of the bowl handle.
2 : Removing the chopping bowl and the lid
b
Chopping bowl assembly
b1 : Food pusher with measuring guide
b2 : Funnel lid
b3 : Bowl
c
Drive pin
i
Fruit juicer
i1 : Cone
i2 : Fruit juicer drive pin
i3 : Basket
j
Blender stick
k
Spatula
l
Storage drawer
(a3)
to the pulse position, pressing successively for better control
to position 1 or 2.
(a)
, with the bowl handle aligned with the corner on the front right
30
(b2) (b3)
onto the bowl .