afriso MSW Notice Technique page 30

6 Commissioning
6.1 Commissioning the product
1. Attach a label in the vicinity of the discharge line or to the product with the
following text:
"For safety reasons, water must be able to escape via the discharge
line during heating. Do not shut off!"
2. Check all connections for tightness.
3. Flush all lines of the system prior to commissioning.
6.2 Function test
1. Provide a container to collect the liquid of the product.
2. Protect all persons from escaping liquid.
3. Open the product by turning the cap.
- Liquid escapes.
4. Release the cap.
- No liquid may escape.
7 Operation
 Verify that liquid can escape via the discharge line during heating up.
1. If the product has triggered, check the system before recommissioning
the system.
2. Perform a function test (see chapter "Function test").
Commissioning
EN
13
MSW