Intenso 6 PHOTOFAN Mode D'emploi page 9

Operating instructions for 6" Intenso Digital Photo Frame
Please comply with the following instructions to be informed about the different functions of the
Intenso digital photo frame.
[ ]
1 Home Taste - Power On/Off
1 Power On/Off
2 Exit [ 2 Play/Pause [ ] Button ] Button


3 Play/Pause [ ] Button 3 Back [ ] Button
4 Up [ ] Button


5 Down [ a Up [ ] Button ] Button


6 Left [ b Down [ ] Button ] Button


7 Right [ c Right [ ] Button ] Button


d Left [ ] Button
To set up the device fold out the integrated
stand.
1) Connect and switch on the digital photo frame
Please note:
- The plug must be placed next to the device so to be easily accessible.
- Do not open the box of the line adapter. If the box is open, there is danger of life caused by electric shock. The
product does not contain parts to be maintained.
- Actuate the line adapter only with earthed plugs of AC 100-240V~, 50/60 Hz. If you are not sure about the provision
of electricity at the installation point, ask your energy provider.
- Use the included line adapter and line connection cable only.
- To interrupt the power supply of your equipment, unplug the adapter. While you are unplugging it, always hold the
adapter. Do never pull the cable.
Connect the Power Adapter supplied with the frame (DC-
IN). Plug the other end of the Adapter into the Socket. The
photo frame will now start automatically. Hold down the
Power button briefly to turn it off or on again.
EN - 1