Intenso 6 PHOTOFAN Mode D'emploi page 10

2) Insert memory cards | connect USB data carriers
The following memory card formats can be used with your digital photo frame:

Secure Digital Card (SD™)

Secure Digital High Capacity (SDHC™)

Multimedia Card (MMC™)
Note: The digital photo frame is exclusively designed for the use with compatible memory cards and 2.0 data media (100 mA).
3) General operation
a) Main menu
When you turn on the digital picture frame, it will automatically begin to display a slide show. If
you have a storage medium with own photos inserted, those will be shown. Alternatively, the
device will show the 4 preinstalled photos.
[ ]
Press the Home
In the main menu, you can chose different functions of the Digital Picture Frame and of the
Setup menu. Press the
you can navigate through the respective submenus. Confirm your selection by pressing the
Play/Pause [ ] button.
b) Viewing photos
From the main menu navigate to the photo function and confirm your selection by pressing the
Play/Pause [ ] button. Now the connected storage mediums are shown. Depending on which
medium is connected, you can chose between a memory card and an USB flash drive.
Confirm your selection by pressing the Play/Pause [ ] button. The image preview menu will
now open and display all supported images saved on the storage medium. Navigate to a photo
and confirm your selection by pressing the Play/Pause [ ] button to start the slide show from
this position on.
Insert the Memory Card with the Logo towards the
Display into the card reader slot.
Please note: Never insert cards by use of force!
USB data carriers can only be plugged into the USB slot in
one direction.
Please note: Never insert USB data carriers
by use of force!
button to open the main menu
 
button to select a menu option. By pressing the ▲, ▼ buttons
,
EN - 2
.