Before Starting - Bohmer-AG i Serie Mode D'emploi

i Series

Before Starting

Add fuel:
01. Place generator on a level surface
02. Open the filler cap
03. Fill with unleaded petrol up to the filter
04. Replace filler cap
Add oil:
Note: the generator will automatically shut down if insufficient oil is detected.
01. Place generator on a level surface
02. Open the oil filler bung
03. Fill with 10W-40 semi-synthetic oil up to the threads
04. Replace oil filler bung
Remove the two bolts
holding the side panel in
place.
06
Unscrew the oil filler bung
and top up using the
supplied funnel.
© Böhmer-AG
English
Ensure the oil is topped up
to the upper level.