Checks And Maintenance; Fuel Level; Spark Plug - Bohmer-AG i Serie Mode D'emploi

i Series

Checks and maintenance

Fuel level

01. 1. Use the fuel gauge on the top of the generator to check fuel level
02. 2. If low, top up using regular unleaded gasoline
03. 3. Fill to the base of the filter
04. 4. Replace fuel tank cap
Note: If checking after use, allow the unit to cool sufficiently before opening fuel cap.

Spark plug

01. Remove spark plug cap and unscrew the
spark plug using the tool.
02. Carefully clean any carbon build-up on the
tip.
12
W4500i
03. Check the gap using a gauge. The gap
should be between 0.7-0.8mm.
04. Adjust as necessary then reinstall the plug
and cap taking care not to cross-thread the
spark plug.
© Böhmer-AG
English
W5500i