Air Filter; Oil Change - Bohmer-AG i Serie Mode D'emploi

i Series

Air filter

The air filter is installed on the intake system of the engine. It allows clean air to flow into the engine to
provide the correct air/fuel mixture.
To check/clean
01. Open generator side panel
02. Check air filter to ensure it is free of dirt build-up
03. If dirty, remove filter and clean with a solvent cleaning solution
04. Squeeze to remove water and allow to dry
05. Add a few drops of oil
06. Squeeze tight to distribute oil and remove any excess
07. Install air filter and cover

Oil change

01. Access oil filler as per Quick start guide
02. Undo the oil bung
03. There is a lip to the the spout above an
opening in the chassis.
04. Tip the unit forward to allow oil to drain
through the opening.
05. Add new 10W-40 semi synthetic oil to the
upper limit of oil cap
06. Install oil bung
© Böhmer-AG
English
13