Publicité
Les langues disponibles
Les langues disponibles
User Manual
Introduction
Thank you for purchasing the 300m Fibre Optic HDMI 10.2G Extender. This product has been designed
to provide trouble free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime
technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
The Lindy Fibre Optic HDMI 10.2G Extender is an efficient, reliable solution for transmitting 4K Ultra HD
HDMI signals over long distances up to 300m. Duplex LC OM3 multimode (50 / 125μm) fibre optic cable
is used.
The extender system consists of two modules, transmitters and receivers, which are connected directly to
the HDMI source and display. The modules are connected to a standard LC fibre optic cable (not included).
Package Contents
▪
Fibre Optic HDMI Transmitter Unit
▪
Fibre Optic HDMI Receiver Unit
▪
2 x USB Type A to Micro-B Cable, 1m
▪
This Manual
Features
▪
Extend HDMI signals up to 300m using a single OM3 LC duplex multimode (50/125µm) cable
▪
Compact housing directly connected to a devices HDMI port
▪
Supports 10.2Gbps bandwidth
▪
Supports resolutions up to 3840x2160@30Hz 4:4:4 8bit / 3840x2160@60Hz 4:2:0 8bit
▪
Supports lossless HDMI audio formats up to 7.1CH
▪
Supports hot plug detection
▪
HDCP Pass-through
▪
EDID Pass-through
▪
Auto-laser Disabling function when unplugged or fibre cable is broken
▪
Black, metal housing
Specification
▪
Requires 1 x Duplex LC OM3 multi-mode fibre optic cable (50/125µm)
▪
Wavelength: 850nm
▪
Housing Material: Metal
▪
Operating Temperature: 0°C - 60°C (32°F - 140°F)
▪
Storage Temperature: -10°C - 70°C (14°F - 158°F)
Humidity: 10 – 75 RH (non-condensing)
▪
▪
Power Requirements: 5V 0.5A
▪
Power Consumption: Tx - 270mA (1.35W) // Rx - 250mA (1.25W)
English
Publicité
