hager RTN300X Manuel page 13

RTN300X · RTN301X
Connection and power supply
Connecting the call button, name plate lighting and relays
Ground contact
PE
Reference ground +UB
0V
+UB
Operating voltage from external
Power supply (28VDC, 1A)
REL1.1
Relay (NO contact) potential-free,
max. 24V / 2A
REL1.2
REL2.1 Relay (NO contact) potential-free,
max. 24V / 2A
REL2.2
Output 24VDC, 200mA
+24V
Not used / no function
ELAN
Ground for +24V output
GND
LED status displays
www.hager.com
PE
0V
+UB
REL1.1
REL1.2
REL2.1
REL2.2
+24V
ELAN
GND
OUTPUT
Central call button
S3B
Ground for central call button
GND
Not used / no function
+5V
Not used / no function
LEDB
Connection for call button 1
Z1
Connection for call button 2
Z2
Connection for call button 3
Z3
Connection for call button 4
Z4
Ground for call buttons 1 - 4
GND
Extension port
for the connection of IP display call module RTN710X,
IP direct dial keypad module RTN100X and IP diode
matrix module RTN720X.
OUT (green)
IN (green)
LED1 (orange)
LED2 (red)
Subject to technical changes
S3B
GND
+5V
LEDB
Z1
Z2
Z3
Z4
GND
NET NET
WORK WORK
INPUT
Continuously on: A device is connected with
the output network port and in operation.
Short flashing signals: Data traffic.
The door speaker module is connected to the
network and in operation. Short flashing sig-
nals: Data traffic.
Continuously on: Door speaker module is con-
nected in a call. Flashing: The factory reset is
complete.
Continuously on: The door speaker module is
not registered with the SIP server.
13