Axis S10 Serie Mode D'emploi page 15

1. Register your pre-installed licenses.
2. Connect to the local S10 server.
3. Select cameras and video encoders to add.
4. Select recording methods and where to store recordings.
5. Review settings and click Finish to add cameras .
6. Start recording and viewing with AXIS Camera Station
For more information, see the built-in help and AXIS Camera Station User Manual available
at www.axis.com
Get Started with AXIS Camera Station - S9002, S9101 and
S9201
Note
Make sure that AXIS Camera Station server is running on AXIS S1016 Mk II /
AXIS S1032 Mk II / AXIS S1048 Mk II Recorder before you follow the steps below.
1. Start AXIS Camera Station Client.
2. Connect to the S10 Recorder. For more information, see the built-in help and AXIS
Camera Station User Manual available at www.axis.com.
3. Select cameras and video encoders to add.
4. Select recording methods and where to store recordings.
5. Review settings and click Finish to add cameras and start recording or viewing with
AXIS Camera Station.
Specification
Note
Offerings may vary by region. The following specifications are only those required by law to ship
with your computer. For more information regarding the configuration of your computer, click Start
> Help and Support and select the option to view information about your computer
Power
Voltage
Coin-cell battery
Wattage
Maximum heat
dissipation
AXIS Camera Station S10 Recorder Series
AXIS S1016 Mk II/AXIS
S9002
100 V AC to 240 V AC
3 V CR2032 lithium
coin cell
365 W
1245 BTU/hr
AXIS S9101
90 V AC to 264 V AC
3 V CR2032 lithium
coin cell
65 W
222 BTU/hr
15
AXIS S9201
90 V AC to 264 V AC
3 V CR2032 lithium
coin cell
155 W
529 BTU/hr
EN