Axis S10 Serie Mode D'emploi page 13

6
Do not use (Serial connector)
7
Line-out/speakers connector
8
PS/2 keyboard connector
9
USB 2.0 connectors (2)
10 Do not use (DisplayPort connectors (2))
11 USB 3.0 connectors (2)
12 Do not use (VGA connector)
13 Line-in/microphone connector
Connect the Cables
Important
Before you begin any of the procedures in this section, read the safety information that
shipped with your computer. For additional information, see www.axis.com
Note
Some devices may not be included if you did not order them.
1. Connect the monitors to the monitor connectors (for S1016 and S9002, use the
connectors located on the discrete graphic card. See page 11 and page 12.)
2. Connect the USB keyboard and mouse.
3. Connect the network cable.
AXIS Camera Station S10 Recorder Series
13
EN