Axis S10 Serie Mode D'emploi page 14

AXIS Camera Station S10 Recorder Series
4. Connect the power cable(s).
5. Press the power button on the monitor and the computer.
Set Up Software
When the computer has been powered on, the Windows operating system will start. Follow the
instructions displayed on the screen and provide the required information. When the Windows
installation is configured, Get Started Application will start automatically. Follow the steps on
the screen.
Network Configuration
AXIS Camera Station can record and play back video from cameras and video encoders that
are connected to a LAN (Local Area Network) or to a WAN (Wide Area Network). Depending
on the installation, follow the instructions under Network & Security Configuration in
AXIS Camera Station User Manual available at www.axis.com
Get Started with AXIS Camera Station - S1016 Mk II
Start AXIS Camera Station Client and the wizard "Get Started with AXIS Camera Station" starts
automatically. "Get Started with AXIS Camera Station" provides a quick way to add cameras and
to configure and enable recording:
14