Changing From Av Out To Av In; Setting Parental Lock Level; Video Enhance - RCA DRC 618N Manuel D'utilisation

Changing from AV OUT to AV IN

You can change the player from AV OUT(output AV signal to TV, etc) to AV IN(input AV signal
from other device)and use it as a TFT Monitor. Default setting is AV OUT.
1
Press MODE button on main unit and switch
LCD mode to AV IN/OUT.
2
Press + or - button to switch between AV OUT
and AV IN.
Note:
Avoid to input AV signals from AV JACK when
the player is set to AV OUT, or interference
will be caused to affect current playback and
lower down playing quality.

Setting Parental Lock Level

1 1
At STOP status, press the SETUP button to display
the setup screen, use the cursor buttons to select
Parental Lock .
2 2
Input your password to unlock setting.
Default password is 9999.
3 3
When at unlock situation, you can change the rating
by using ENTER button.
4 4
Move to password and input your new password to
lock the setting.

Video Enhance

Press the SETUP button while playing
disk, the Video Enhance screen will be
displayed. Change brightness or edges
,
of pictures by using cursor buttons to
improve picture quality.
Graphics are for representation only. Your unit may differ slightly.
Advanced Operations
,
31
-EN
AV cable(included)
AV signals inputted
from other device
A
Language
Video Audio
PASSWORD ----
Rating 8.Adult
Video Enhance
Brightness
Edges
E N
Parental
08
08