Connecting To A Digital Amplifier That Is Not Dolby Digital/ Dts/ Mpeg Compatible - RCA DRC 618N Manuel D'utilisation

Connecting to a digital amplifier that is not Dolby Digital /
DTS / MPEG compatible
Output the digital signals from the player's digital output to a digital amplifier that is not
Doby/DTS/MPEG compatible.
Main unit left panel
Notes:
Carefully check the player s digital output settings before connecting the player to an
amplifier equipped with a digital audio input jack which is not Dolby Digital / DTS / MPEG
compatible.
Do not play DVDs when the audio settings are not correct. Or may cause strong
noise and damage your speakers.
Graphics are for representation only. Your unit may differ slightly.
Optical digital cable
(not included)
To digital audio
input jack
DIGITAL IN
,
17
-EN
Before Using
See Page 22 for
details of connections
to TV .
: Signal flow
E N