Playback Functions; Loading - RCA DRC 618N Manuel D'utilisation

Basic Operations

Playback Functions

E N E N

Loading

1
2
3
,
24
-EN
Graphics are for representation only. Your unit may differ slightly.
1
Press OPEN button to open.
(If no disk is placed in, the tray will
open automatically after power on.)
2
If no power supply, the tray
will not open, you must
inser t the open-stick into
the hole to open it.
3
Place in disc and press down
the disc with your fingers
near the center hole.
A click is heard.
Notes:
Set the disc securely. Failure to set it
securely could result in damage.
Do not use cracked or warped discs.
Doing so could result in damage.
Place single-sided DVDs or CDs in
with the label (printed) side facing
upwards.
For double-sided DVDs, check each
side carefully, then place the disc in
securely (until a click is heard).
For CDs or one-sided DVDs, you do
not have to worry about touching the
label (printed) side of the disc with
your fingers. Since two-sided DVDs,
however, have signals recorded on
both sides, so be careful not to
scratch them when removing them
from the player.
4
Push the tray into the player.
The player starts loading.