Playing; If A Menu Screen Appears - RCA DRC 618N Manuel D'utilisation

Playing

1
Load the disc.
One of the following messages appears on the screen:
DVD, VCD, CD.
For some discs, playback starts automatically when
the tray is closed.
For the disc which had been programmed and stored
in memories, playback starts automatically in the
programmed order.
2 2
Press the play/pause button.
Playback starts.
For some discs, a menu screen appears. For video CDs, they are played according to the
instructions on the disc's menu screen which is called PBC (playback control).
Hint:
For video CDs, it is also possible to play a disc without displaying the menu screen.
For example, press 1 ( number button) while at STOP mode to play track 1.
For CDs, in order to save power, the screen display will be closed automatically if no button is
pressed for 1 minute during playing. Press any button to wake it up.

If a menu screen appears

For DVDs with menu screen or video CDs with playback control (PBC), a menu screen appears.
DVD
Use the cursor buttons (
In order to use the number buttons on the remote control unit to select the item, first press
the SHIFT button until NUMBER is displayed on screen, then press number buttons to
select the item.
Example: For DVDs with menu screen
Graphics are for representation only. Your unit may differ slightly.
Basic Operations
Number
buttons
) to select the item, then press the ENTER button.
25
-EN
Next
Shift
E N