Installation In The Car - Quintezz Drive Control Mode D'emploi

1.2 MEANING OF EACH PART IN THE BOX
See illustration I
1. Setting button: To enter the menu options and activate the download mode
2. Save button:
i.
ii.
iii.
3. Volume – button: To decrease the volume.
4. Volume + button: To increase the volume.
5. Red button:
i.
ii.
6. PC – USB Port: For downloading data from your computer
7. Display
8. Speaker
9. laser Detector lens – rear
10. Laser Detector lens – front
11. radar Detector lens
12. DC 12V: Power port for cigarette plug
13. lock switch for windshield bracket
14. Windshield bracket
15. Power cord
16. Velcro
Manual
CD with PC software

INSTALLATION IN THE CAR

2.1 DRIVE CONTROL
The QUINTEZZ DRIVE CONTROL is especially designed for use in the car. GPS signals are received through the built-in GPS antenna.
The following are some guidelines for mounting the detector :
• The unit may be positioned within 25° of horizontal without significantly degrading performance.
• The information display of the DRIVE CONTROL has to be clearly visible to the driver.
• Do not mount directly behind windshield wipers.
Allows the user to manually add new locations where from now on warnings will be given in driving
mode.
Allows the user to manually delete locations.
The user's preference for each option can be set in setting mode.
To de-activate the Radar / Laser Detector once you access countries where the Radar / Laser
Detector is not allowed: press this button briefly (not longer than 2 sec.!). If you press this button
too long, the device will set to 'illumination' mode and the Radar / Laser Detector will NOT be
switched off.
To dim the display (long pressing, until you see ILLU: xxx).
-GB-2-