Alert Screens Of The Drive Control - Quintezz Drive Control Mode D'emploi

ALERT SCREENS OF THE DRIVE CONTROL

The DRIVE CONTROL will show the following screen when you approach a speed camera. The following alert indicates a camera
warning at a distance of 450 meter on the current road.
While driving, the DRIVE CONTROL will give a warning sound when you approach a camera, a dangerous location, a track control
section or a user data location. The sound of this warning depends on what you have set up for the 'bell / extra sound'. In case this
setting has been switched OFF, there will only be a warning whenever the speed limit is exceeded. The maximum speed on the
particular location will also be shown on the display. In case this setting is ON, there will be a warning for every camera.
The first warning will be given at a distance of 500 meters. The second warning (KEEP SAFETY DRIVING) will be heard at a distance
of 300 meters.
5.1 CAMERA & TWO-WAY CAMERA
This alert indicates a camera or a two-way camera warning at a distance of 450 meter on the current road. Please check your speed
and slow down in case of overspeed. At a distance of 500 meter of the camera you will hear 'CAMERA' or 'TWO WAY CAMERA' and
at a distance of 300 meter the DRIVE CONTROL will say 'BE CAREFUL'.
5.2 DANGEROUS LOCATION, TRACK CONTROL & TRACK CONTROL END
track control dangerous location warning
This alert indicates a dangerous location, a track control or a track control end at a distance of 450 meter on the current road.
Please check your speed and slow down. At a distance of 500 meter of the location you will hear 'DANGEROUS LOCATION', 'TRACK
CONTROL' or 'TRACK CONTROL END' and at a distance of 300 meter the DRIVE CONTROL will say 'BE CAREFUL'.
5.3 A USER REGISTERED LOCATION
You can manually add and delete locations from the memory of the DRIVE CONTROL while driving. These locations are called
'user data' and can be exchanged with other people using the DRIVE CONTROL. The memory for user data has a capacity of 800
locations.
-GB-9-