TaoTronics TT-DL071 Mode D'emploi page 5

EN
Package Contents
• 1 x TaoTronics LED Table Lamp (Model: TT-DL071)
• 1 x Charging Cable
• 1 x Cleaning Cloth
• 1 x User Guide
Specifications
Model TT-DL071
Input DC 5V/1A
Power Consumption 6W
Color Temperature 3000K-3500K
Light Angle 360° Uniform Lighting
Luminous Flux 300 lm
Battery Capacity 4000mAh
CRI >80
Operation Temperature -20°C to 45°C (- 4°F to 113°F)
How to Use
Light On / Light Off
Tap on the Brightness Control Button to turn on / off the light.
Brightness Control
Press and hold down on the Brightness Control Button to adjust the brightness of the light. The
brightness will increase / decrease accordingly.
Charging
When charging, the charging status indicator will turn red. When fully charged, the indicator
will turn blue. When the battery level is low, the indicator will flash red.
Caution
• Please do not repair the product by yourself, always ask a professional electrician or
authorized technician for repairs.
• If you smell a bad odor or anything unusual, please turn off the unit immediately.
• Please do not remove the charging cable with wet hands as it may
cause electrical shock.
• Do not put this unit near extreme heat source, moisture, or corrosive substance.
• Regularly clean the lamp.
• Please store the lamp in a dry and shady place if it is not being used for a
long period of time.
Troubleshooting Guide
Problem Possible Cause
The lamp does not
No power supply
light up
Wet hand
The touch panel is
not responsive
Voltage fluctuation
LED failure LED component fails
Charging cable fails
Bad smell
Short circuit
Solution
Power on correctly
Touch the Brightness Control Button
with dry hands
Press the Reset Button
Please contact the TaoTronics
Support Team
01/02