TaoTronics TT-DL038 Mode D'emploi page 5

EN
Speci cations
Model TT-DL038
CRI
＞80Ra
Operating Voltage DC 10V/3A
Power(Only for the Light) 12W
USB Output DC 5V/1A
Wireless Charger Output 10W Max
Lumens 400lm
Operating Temperature -20℃~ 40℃ /-4℉~104℉
Color Temperature 2700-3000K(1)， 4000K±200K(2)， 4500K±200K(3)， 5000K±300K(4)，
6000-6500K(5)
How to Use
Use the included power adapter to connect to a power source, the lamp is now in standby mode
and the Power Button indicator will light up.
Power On / O the Main Light
• In standby mode, tap the Power Button once to turn on the main light. All the button indicators
will light up.
• Tap again to turn o the main light, only the power indicator will remain on.
Adjust the Color Temperature
• The lamp will enter warm light mode by default when turned on. Tap the Mode Button to cycle
through 5 color temperature modes.
Adjust the Brightness
• The lamp will enter the 3rd level brightness by default when turned on. Slide across the Brightness
Slider to adjust the light brightness, the brightness indicator will light up accordingly.
Set the Timer
• Tap the Timer Button once to set one hour timer for the main light and night light, the timer
indicator will blink to start the countdown. Tap again to exit the timer.
Night Light
• Tap the Night Light Button to activate the night light, the main light will turn o . All button
indicators (except the night light and power indicator) will turn o .
• Tap one more time to turn o the night light.
Memory Function
• With power connected, the lamp will resume the color temperature and brightness of the last use
when turned on.
Note: We suggest you set to a low brightness level before turning the lamp o to prevent glares
when you turn the light on again.
USB Port
Charge your smartphone, tablet, e-reader or any USB devices through the 5V/1A USB port.
Wireless Charger
· Place your phone with Qi-BPP compatibility on the wireless charging station to automatically start charging.
· The charger supports 7.5W wireless charging for newest iPhone X / 8 Plus / 8 in iOS 11.2 or above and 10W fast
charging to selected Samsung Galaxy, Google Nexus, or MicrosoftLumia phones.
Note:
If charging does not occur, adjust the phone so its receiver can be detected. Please note that di erent model
phones have their receivers in di erent positions.
Caution
• Please hold the lamp parts accordingly when adjusting the angle of the lamp head and arm.
• Please adjust the lamp within the allowed angle. Do not use excessive force to avoid damages
to the product.
01/02