Wiring Variants (Only Pa 1260 R); Bi-Wiring - T+A P 1260 R Mode D'emploi

Wiring variants
(only PA 1260 R)

Bi-Wiring

(see Appendix A 2)
The term bi-wiring refers to a method of connecting
loudspeakers in which separate loudspeaker cables are
used for the bass and mid-range/treble signals.
This arrangement eliminates the danger of signal colora-
tion in the mid-range / treble area caused by voltage
peaks in the bass.
Bi-wiring is only possible if the speakers are fitted with
bi-wiring terminals. It is essential that the bridging piece
between the bass and mid-range / treble channels is
removed at the speaker terminals.
As the wiring diagram shows, bi-wiring enables you to
employ the optimum cable for each frequency range.
39