TaoTronics TT-DL036 Mode D'emploi page 5

EN
What's In the Box
· TaoTronics LED Desk Lamp (TT-DL036)
· Power Adapter
Specifications
Model TT-DL036
Light Source LED
CRI >80
Operating Voltage DC 10V 3A
Power (Only for the Light) 12W
USB Output 5W
7.5W for iPhone, 10W for Samsung
Wireless Charger Output
Lumens 410 lm
Color Temperature 2700-6000K
Operating Temperature -10 °C to 40 °C / - 14 °F to 104 °F
Lifespan 50,000 hours
How to Use
Power On / Off
1. Connect the adapter to a wall outlet, the product enters standby mode with the Power
Button indicator lighting up.
2. Tap and hold the Power Button to turn off the light.
Brightness Control
Slide your finger along the Brightness Slider to adjust the brightness
Color Temperature Control
Tap on the Mode Button to cycle through 5 levels of color temperature
Memory Function
The lamp will retain the color temperature and brightness setting of the time when it was last
turned off.
Note: Set the lamp to low brightness level when you turn it off to prevent glare.
USB Port
Charge your smartphone, tablet, e-reader or any USB devices through the 5V/1A USB port.
Wireless Charger
Place your phone with Qi-BPP compatibility on the wireless charging station to automatically
start charging.
Note:
If charging does not occur, adjust the phone so its receiver can be detected. Please note
that different model phones have their receivers in different positions.
Caution
· Hold the lamp base when adjusting the angle of the lamp head.
· Rotate the lamp head within an appropriate angle range. Do not pull with excessive force
to prevent damaging the product
01/02