Publicité
Les langues disponibles
Les langues disponibles
Turn the food from time to time.
7
When the food is done, remove it from the grilling plate.
8
Do not use metal, sharp or abrasive kitchen utensils.
For optimal results, remove excess oil from the grilling plate with a
9
piece of kitchen paper. Loosen any caked food or grease carefully and
remove it from the plate before you grill the next batch of food.
To continue grilling, place the next batch of food on the grilling plate
10
when the heating-up light goes out.
Grilling times
In the table at the end of this booklet you find some types of food you
can cook on this table grill. The table shows which temperature to select
and how long the food has to be grilled. The time required to heat up the
appliance has not been included in the grilling times indicated in the table.
The grilling time and temperature depend on the type of food that you
prepare (e.g. meat), its thickness and its temperature and also on your own
taste. You can also refer to the indications on the thermostat unit.
Tips
-
You can also use the table grill as a thermostatically controlled hotplate
that automatically keeps your dishes at the required temperature. Cover
the hot plate with aluminium foil with the shiny side facing upwards. Set
the temperature control to position 2 or 3.
-
Tender pieces of meat are best suited for grilling.
-
Pieces of meat such as steaks or spare rib chops become more tender
if marinated overnight.
-
Turn the food from time to time to ensure that it remains juicy inside
and does not dry out. Do not use any metal tools like forks or grill
tongs as they damage the non-stick coating of the grilling plate.
-
Do not turn the grilled food too frequently. When the items are brown
on both sides, grill them at a lower temperature to ensure they do not
dry out and are cooked more evenly.
-
If you want to defrost frozen food, wrap the frozen food in aluminium
foil and set the temperature control to position 1 or 2. Turn the food
from time to time. The defrosting time depends on the weight of
the food.
-
When you prepare satay, chicken, pork or veal, first sear the meat
at a high temperature (position 5). If necessary, you can then set the
temperature control one position lower and grill the food until it is done.
-
When you make satay or kebab, soak bamboo or wooden skewers in
water to prevent them from getting scorched during grilling.
Do not use metal skewers.
-
Sausages tend to burst when they are being grilled. To prevent this,
punch a few holes in them with a fork.
-
Fresh meat gives better grilling results than frozen or defrosted meat.
Do not put salt on the meat until after you have grilled it. This helps to
keep the meat juicy. For the best result, make sure the pieces of meat
you prepare are not too thick (approx. 1.5cm).
This table grill is not suitable for grilling breadcrumbed food.
Cleaning
Never use abrasive cleaning agents and materials, as this damages the
non-stick coating of the plate.
Set the temperature control to the 'OFF' position.
1
Unplug the appliance and let it cool down.
2
Pull the thermostat unit out of the appliance (Fig. 6).
3
Wipe the thermostat unit with a damp cloth.
4
Do not immerse the thermostat unit with mains cord in water or any
other liquid.
Remove excess oil from the grilling plate with a piece of kitchen
5
paper before you remove the grilling plate for cleaning.
Lift the grilling plate from the base by its handgrips (Fig. 4).
6
Note: If the thermostat unit is still inserted into the appliance, you cannot
remove the grilling plate.
Soak the grilling plate in hot water with some washing-up liquid for
7
five minutes or drizzle some lemon juice onto the grilling plate.
This loosens any caked food or grease.
Slide the drip tray out of the base (Fig. 7).
8
Note: The drip tray can only be slid out of the base in one way.
Clean the base and the drip tray with a damp cloth.
9
Clean the grilling plate with a soft cloth or sponge in hot water with
10
some washing-up liquid or in the dishwasher.
Dry the grilling plate and drip tray.
11
The inside of the thermostat unit socket must be completely dry before
you reinsert the thermostat unit into it. To dry the socket, wipe the inside
with a dry cloth. If necessary, shake out excess water first.
Reassemble the appliance.
12
Storage
Leave the thermostat unit in the grill. Wind the cord and fix it with
1
the twist tie (Fig. 8).
Store the grill in upright position on a dry and level surface (Fig. 9).
2
Note: Make sure that the stoppers are at the bottom, so that the drip tray
cannot fall out of the appliance.
Environment
-
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment (Fig. 10).
Guarantee & service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com/support or contact the Philips
Consumer Care Centre in your country. You find its phone number in the
worldwide guarantee leaflet. If there is no Consumer Care Centre in your
country, go to your local Philips dealer .
Food table (Fig. 11)
FRANÇAIS
Introduction
Félicitations pour votre achat et bienvenue dans l'univers Philips !
Pour profiter pleinement de l'assistance Philips, enregistrez votre
produit sur le site à l'adresse suivante : www.philips.com/welcome.
Votre nouveau plancha avec plateau égouttoir vous permet de préparer
toutes sortes de recettes délicieuses en dégageant le moins de fumée
possible. Grâce à la grande surface de cuisson de cet appareil, la cuisson au
plancha est très facile.
Description générale (fig. 1)
1
Poignées isolantes
2
Plaque de cuisson résistante au lave-vaisselle
3
Base
4
Plateau égouttoir
5
Prise du bloc thermostat
6
Bloc thermostat
7
Thermostat avec position marche/arrêt et voyant de chauffe
8
Cordon d'alimentation avec attache torsadée
9
Pinces
Important
Lisez attentivement ce mode d'emploi avant d'utiliser
l'appareil et conservez-le pour un usage ultérieur.
Danger
- Ne plongez jamais le bloc thermostat et le cordon
d'alimentation dans de l'eau ou dans tout autre
liquide.
Avertissement
- Avant de brancher l'appareil, vérifiez que la tension
indiquée sur la base correspond à la tension secteur
locale.
- N'utilisez jamais l'appareil si la prise, le cordon
d'alimentation ou l'appareil lui-même est endommagé.
- Si le cordon d'alimentation est endommagé, il doit
être remplacé par Philips, par un Centre Service
Agréé Philips ou par un technicien qualifié afin
d'éviter tout accident.
- Branchez l'appareil uniquement sur une prise secteur
mise à la terre.
- Tenez le cordon d'alimentation à l'écart des surfaces
chaudes.
Publicité
