oneConcept 10027962 Mode D'emploi page 16

Remark:
• The system can detect and read the fi le under MP3 format only at USB mode but
not other music fi le format.
• If connect the system to MP3 player via the USB socket, due to variances in MP3
encoding format, some MP3 player may not be able to play via the USB socket.
This is not a malfunction of the system.
• USB port does not support connection with USB extension cable and is not
designed for communication with computer directly.
Removing of USB
To remove the USB, turn off the power then un-plug it by pulling out the USB socket di-
rectly.
Aux-in connection
Connect the unit to any auxiliary device (i.e. MP3 player, or iPod ® (not included) by con-
necting the Aux-in jack (14) at the rear cabinet with one end of 3.5mm stereo cable (not
provided) and the other end connect to the auxiliary device to perform the music.
1. Slide function selector (18) to select " CD/AUX" mode.
2. Plug the Aux-in jack. The channel will switch to Aux automatically.
3. Adjust Volume Knob (17) to the desired volume level. If the distortion is too high, re-
duce the volume level of your auxiliary device. Start to playback your device.
BT connecting and Playback
1. Set the function selector (18) to Radio/BT position and keep the BT/FM selector (20)
in BT position
2. The BT/USB LED indicator (10) will fl ashing, it means the BT in non connection /
searching mode.
3. Switch on the BT feature of your BT device (such as mobile phone) and select
"GROOVIE" BT equipment to connecting.
4. Once the connecting was fi nish and connect successfully, the BT LED (10) will change
to light up.
5. Start to playback your BT device and enjoy the music by the main unit.
16