Installation; Operation - oneConcept 10027962 Mode D'emploi

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the main voltage and before all
other connections have been made.
• Do not cover any vents and make sure that there is a space of several centimetres at
the back of the unit for ventilation.
AC connection
1. Connect the one end of the detachable power cord to the AC socket (19) and the other
end to the ac outlet.
2. Turn on the unit by press and hold On-Off/Play button (7).
DC connection
• For DC operation, please insert 6 pcs size C
(UM-2) battery at battery compartment (15)
as below direction and please unplug the AC
socket (19) during operate with battery:-
Caution:
Usage of controls or adjustments or performance of procedures other than those
specifi ed herein may result in hazardous radiation exposure. This unit should not be
adjusted or repaired by anyone except qualifi ed service personnel.
Listening to radio

Operation

1. Press and hold the On/off/Play button (7) to turn on the unit and slide function selec-
tor (18) to select Radio/BT position and keep the BT/FM selector (20) in FM position.
2. Turn the tuning knob (13) to set the station frequency as desired.
3. Adjust volume knob (17) to the desired volume level.
Hints for best reception:-
• FM : the receiver has rod antenna (12) hanging at the rear cabinet. This antenna
should be totally extended for best reception.

Installation

Operation
13