Safety Instructions; Important Safety Instructions - gigamedia GGM CCMLCD17PP Manuel D'utilisation

Safety instructions

EN
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing area.
An objects filled with liquids such as vases shall not be placed on the apparatus.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions
2. Keep these instructions
3. Heed all warnings
4. Follow all instrucions
5. Do not use this apparatus near water
6. Clean only with a dry cloth
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions
8. Do not install near any heat source such as radiators, heat registrers, stoves or other apparatus (including amplifiers)
that produce heat
9. Unplug this apparatus during lightning storms or when unused for long period of time.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus
11. Only use the attachments/accessories specified by the manufacturer
12. Refer al l servicing to qualified service personnel.Servicing is required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped
13. Use only with a cart, stand, tripod,bracket, or table specified by the manufacturer, or sold with the apparatus. When a
cart is used, be cautious when moving the cart\apparatus combination 10 avoid injury from lip-over.
14. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one
wider than the other, A grounding type plug has two blades and a third grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not
fit for your outlet,consult an electrician for replacement of the obsolete outlet.
Note
- If the CCTV monitor feel cold to the touch, there may be a small "flicker" when it is turned on. This is normal,
there is nothing wrong with CCTV monitor.
-Some minute dot defects may be visible on the screen, appearing as tiny red, green or blue spots. However
there have no adverse effect on the monitor's performance.
- Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. In that case, it
may produce some temporary distortion effect on the screen.
4
www.gigamedia.net