Selecting Input Source; Osd Step Under Vga Input Mode - gigamedia GGM CCMLCD17PP Manuel D'utilisation

2.4. Selecting input source

2.5. DSD setup under VGA input mode
A. Press the "MENU" button to access Main Menu setting interface.
34
B. Press the " " "to select the desired submenu.
56
C. Press the " " again to enter the submenu.
2.5.1. PC menu options
2.5.2. OSD menu options
2.5.3. GEOMETRY menu options
www.gigamedia.net
You can select the input source by pressing INPUT button on the remote control on the
front panel.
56
- Press the button to select the source you want.
- Press the "INPUT" button to confirm.
34
- Press "
56
- Use " " to select what you want to adjust in the VGA mode.
34
- Press"
- When you are satisfied with your adjustment, press MENU to exit the main
menu.
34
- Press "
56
- Use " " to select what you want to adjust in the VGA mode.
34
- Press"
- When you are satisfied with your adjustment, press MENU to exit the main
menu.
34
- Press "
56
- Use " " to select what you want to adjust in the VGA mode.
34
- Press"
- When you are satisfied with your adjustment, press MENU to exit the main
menu.
" button to select PC menu.
" button to adjust.
" button to select OSD menu.
" button to adjust.
" button to select GEOMETRY menu.
" button to adjust.
EN
11