gigamedia GGM CCMLCD17PP Manuel D'utilisation page 9

1.6.2. BNC INPUT and BNC OUTPUT Connection
DVR back
- Connect the BNC in cable output of the DVR to the BNC input on the set.
-Connect the BNC out cable input of the other monitor to the BNC output on the set.
- Select BNC1 or BNC2 input source with using the INPUT button on the remote control.
1.6.3. PC Connection
This CCTV monitor provides plug and play capability, meaning that the PC adjusts automatically to the monitor's selting.
The CCTV monitor sends configuration information (EDID) to the PC using the Video Electronics Standard Association (VESA)
Display Data Channel (DDC) protocol.
www.gigamedia.net
DVR
• Connect the RGB output of the PC to the VGA in
jack on the set.
• Turn on the PC and set.
• Select the VGA input source with using INPUT
button on the remote control.
EN
9