Warranty; Emc Compliance - Welch Allyn 5002 Mode D'emploi

30 Appendices

Warranty

Welch Allyn will warranty the weight scale to be free of defects in material and
workmanship and to perform in accordance with manufacturer specifications for the
period of one year from the date of retail purchase.
The warranty period shall start on the date of purchase. The date of purchase is: 1) the
invoiced ship date if the device was purchased directly from Welch Allyn, 2) the date
specified during product registration, 3) the date of purchase of the product from a
Welch Allyn authorized distributor as documented from a receipt from said distributor.
This warranty does NOT cover damages caused by misuse or abuse, including but not
limited to:
• Failure caused by unauthorized repairs or modifications
• Damage caused by shock or dropping during transportation
• Damage caused by improper use of the power supply
• Failure caused by improper operation not consistent with the instructions stated in
this Directions for use
Should this device require maintenance (or replacement at our option) under warranty,
contact your local Welch Allyn representative:
contact-us.html

EMC compliance

Special precautions concerning electromagnetic compatibility (EMC) must be taken for all
medical electrical equipment. This device complies with IEC 60601-1-2 Ed 4.0 / EN
60601-1-2:2015..
• All medical electrical equipment must be installed and put into service in accordance
with the EMC information provided in this document, the Welch Allyn® Masted
Scales Directions for use.
• Portable and mobile RF communications equipment can affect the behavior of
medical electrical equipment.
The device complies with all applicable and required standards for electromagnetic
interference.
• It does not normally affect nearby equipment and devices.
• It is not normally affected by nearby equipment and devices.
• It is not safe to operate the scale in the presence of high-frequency surgical
equipment.
• However, it is good practice to avoid using the device in extremely close proximity to
other equipment.
Emissions and immunity information
The Welch Allyn Masted Scale is intended for use in the electromagnetic environment specified below. The customer or
user of the Welch Allyn Masted Scale should assure that it is used in such an environment.
http://www.welchallyn.com/en/other/
Electromagnetic emissions
Welch Allyn Masted Scales