Publicité
Les langues disponibles
Les langues disponibles
Setting Up
AC Power Connection
This fixture includes an auto sensing power supply ranging from AC100-240V, 50-60Hz.
Only connect fixture to AC power within this range.
This fixture can be powered through daisy chaining method. Connecting power output to
power input, all fixtures in the chain will draw power via the first fixture. Total current draw of
all fixture must not exceed 8 amps maximum.
Data Linking
Serial data links is required when operating the fixture through DMX controller. When
planning the data link please consider following:
Maximum recommended length of data link is 500 meters.
․
Maximum recommended number of data linked fixtures is 32 units.
․
Fixture must be daisy chanined by linking data output to next data input.
․
Data output must be terminated on last fixture of each chian using a termination plug.
․
Avoid long parallel run of AC power and data cables as it may cause interference on
․
the data link.
6
Publicité
