Antari DarkFX Wash 2000 Mode D'emploi page 7

DMX Connector Pin Assignment
The fixture provide 5 pin XLR connector for DMX connection. Diagram below indicate pin
assignment information
DMX Connection
When using standard DMX controller, connect the DMX output of the controller directly with
the DMX input of the first fixture in the DMX chain. Connect the DMX output of the first
fixture in the chain with DMX input of the next fixture.
Physical Installation
Use supplied mounting bracket or rigging clamp to install fixture.
․
Make sure installation location, fastening connecting, and rigging hardware can hold at
․
least 10 times the weight of the fixture.
Make sure no combustible or flammable material nearby.
․
Secure each fixture with an approved safety cable that can hold at least 10 times the
․
weight of fixture.
Make sure fixture installed in a well ventilated area.
․
Pin
1
2
3
Important
Function
Ground
Data-
Data+
7