Marvel 41013943 Mode D'emploi page 5

6. Remove the hex head screws from around the perim-
eter of the rear access cover with the
and remove the access cover from the ice machine.
(See Figure 6).
7. Loosen the hose clamp at the bottom of the drain tee
and remove the discharge tubing from the drain tee.
(See Figure 6a).
Discharge tubing
DRAIN PUMP INSTALLATION
⁄ " nut driver
5
16
Figure 6a
Drain tee
Loosen hose clamp and
remove discharge tubing
5
Figure 6
Access
cover
#10 hex
head screw