Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
448 Series
Pull-Out Base Organizers
1. Disengage Cabinet Slide Assembly from unit by
pressing release levers on the 2 vertical slides
and pulling unit away from
Cabinet Slide Assembly (see fi g. 1).
2. Center Cabinet Slide Assembly on cabinet fl oor
⅞ " from front outside edge of cabinet
(see fi g. 2).
3.
Mount Cabinet Slide Assembly to cabinet
fl oor with provided screws.
If door mounting
4. Engage Product Slide Assembly to Cabinet Slide
Assembly (see fi g. 3). *
5. Attach door to unit. Note: utiliize the adjustable
door mounting brackets to ensure mounting in
think portion of cabinet door (see fi g. 4).
If non-door mounting
4. Remove Product Slide member from unit and
rotate 180 degrees (see fi g. 5a-c)
4a. Repeat with all 3 members
5. Re-Attach Product Slide Assembly to unit.
6. Engage Product Slide Assembly to Cabinet
Slide Assembly (see fi g. 3).*
* If necessary, use the provided
spacers to prevent horizontal movement.
fi g. 1
fi g. 3
fi g. 5a
fi g. 5c
fi g. 2
Front Edge of Cabinet
Slide Assembly
Mounting Bracket ⅞ "
Front Edge of Face Frame
fi g. 4
fi g. 5b
Publicité
