Lamona LAM1851 Manuel De L'utilisateur page 16

Hob²Hood
It is an advanced automatic function which connects the hob to a special hood. Both the
hob and the hood have an infrared signal communicator. Speed of the fan is defined
automatically on basis of mode setting and temperature of the hottest cookware on the
hob. You can also operate the fan from the hob manually.
For most of the hoods the remote system is originally deactivated. Activate it
before you use the function. For more information refer to hood user manual.
Operating the function automatically
To operate the function automatically set the automatic mode to H1 – H6. The hob is
originally set to H5. The hood reacts whenever you operate the hob. The hob recognizes
temperature of the cookware automatically and adjusts the speed of the fan.
Automatic modes
Mode H0
Mode H1
3)
Mode H2
Mode H3
Mode H4
Mode H5
Mode H6
1) The hob detects the boiling process and activates fan speed in accordance with automatic mode.
2) The hob detects the frying process and activates fan speed in accordance with automatic mode.
3) This mode activates the fan and the light and does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch for 3 seconds. The display comes on and goes off.
16
Automatic light
Off
On
On
On
On
On
On
1)
Boiling
Off
Off
Fan speed 1
Off
Fan speed 1
Fan speed 1
Fan speed 2
2)
Frying
Off
Off
Fan speed 1
Fan speed 1
Fan speed 1
Fan speed 2
Fan speed 3