Lamona LAM1851 Manuel De L'utilisateur page 13

Bridge
The function operates when the pot covers the centres of the two zones.
This function connects two cooking zones and they operate as one.
First set the heat setting for one of the cooking zones.
To activate the function for left / right cooking zones: touch
the heat setting touch one of the left / right control sensors.
To deactivate the function: touch
Automatic Heat Up
Activate this function to get a desired heat setting in a shorter time. When it is on, the zone
operates on the highest setting in the beginning and then continues to cook at the desired
heating setting.
To activate the function the cooking zone must be cold.
To activate the function for a cooking zone: touch
a desired heat setting. After 3 seconds
To deactivate the function: change the heat setting.
PowerBoost
This function makes more power available to the induction cooking zones. The function
can be activated for the induction cooking zone only for a limited period of time. After this
time the induction cooking zone automatically sets back to the highest heat setting.
Refer to "Technical data" chapter.
To activate the function for a cooking zone: touch
To deactivate the function: change the heat setting.
Timer
• Count Down Timer
You can use this function to set the length of a single cooking session.
First set the heat setting for the cooking zone, then set the function.
To set the cooking zone: touch
appears.
To activate the function: touch
indicator of the cooking zone starts to flash, the time counts down.
To see the remaining time: touch
zone starts to flash. The display shows the remaining time.
To change the time: touch
/ . The cooking zones operate independently.
comes on.
repeatedly until the indicator of a cooking zone
of the timer to set the time (00 - 99 minutes). When the
to set the cooking zone. The indicator of the cooking
to set the cooking zone. Touch
/ . To set or change
( comes on). Immediately touch
. comes on.
or .
13